Winch

Winch
Type	N/A
Recipe	Wood 5x Cloth 2x
Raw Recipe	Wood 5x Grass 4x
Config	DeltaLength(number)[0 - 100] MinLength(number)[0 - 100] MaxLength(number)[0 - 100]
Durability	N/A
Malleability	N/A
Flammable	Yes

The Winch is a part that controls attached ropes when triggered and activated by a polysilicon.

To make it work, you must use hammer tool, click on CJoint tab, click on a pulley first and click on another part in order to connect a rope from a winch to a part. Connect a polysilicon to a pulley so as to trigger objects can control ropes.

Its appearance is a navy-colored part with a decal image on the

In-game Description

"A special device used to control the length of constraints attached to it. When attaching a constraint to the Winch, click the Winch first. When triggered with polysilicon, it will increase (Activate) or decrease (Deactivate). "

Configuration

• DeltaLength^{(number) [0 - 100]} - The length change in studs when triggered by Polysilicon.
• MinLength^{(number) [0 - 100]} - The minimum length in studs of the rope.
• MaxLength^{(number) [0 - 100]} - The maximum length in studs of the rope.

Pulley

Pulley
Type	N/A
Recipe	N/A
Raw Recipe	N/A
Config	N/A
Durability	N/A
Malleability	N/A
Flammable	Yes

The Pulley was replaced by Winch with its new textures and configuration names since 2022-02-28 Update.

Its appearance is a brown-colored part with 2 textures at the top and bottom side.

In-game description

"A special device used to control the length of constraints attached to it. When attaching a constraint to the Pulley, click the Pulley first. When triggered with polysilicon, it will increase (Activate) or decrease (Deactivate). "

Configuration

• MinLength^{(number) [0 - 100]} - The minimum length in studs of the rope.
• MaxLength^{(number) [0 - 100]} - The maximum length in studs of the rope.